Opis przetłumaczony automatycznie (Oryginalny opis - Producent): Precyzyjne, bezśrodkowe i polerowane sprężyny robocze zapewniają płynniejszą i cichszą pracę w buforowych rurkach AR. Lepsze odczucie impulsu powoduje szybsze przywracanie wzroku i większą niezawodność. Więcej...
Dodatkowa moc dla płynniejszej, cichszej i bardziej niezawodnej jazdy na rowerze
Precyzyjne, bezśrodkowe i polerowane sprężyny robocze zapewniają płynniejszą i cichszą pracę w buforowych rurkach AR. Lepsze odczucie impulsu powoduje szybsze przywracanie wzroku i większą niezawodność. Średnica zewnętrzna jest szlifowana i polerowana, aby zapewnić płynny i cichy ruch w rurze buforowej. Karabin pasuje do karabinów stacjonarnych z tuleją buforową A1 / A2. Karabinek pasuje do składanej rurki buforowej typu M4. Karabin 308 - Pasuje do karabinów stacjonarnych AR10 i 308 AR z tuleją buforową A1 / A2. 308 Carbine - pasuje do rurek buforowych AR10 i 308 AR. JP Enterprises zaleca stosowanie sprężyn buforowych JP Tuned i Polished 308 w przypadku grupy nośników śrubowych JP 308 o niskiej masie
SPECYFIKACJE: Stal, polerowane wykończenie. Karabin - długość 34 cm. Karabinek - długość 30 cm.
Więcej...
Extra Power For Smoother, Quieter, More Reliable Cycling
Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. Rifle fits fixed stock rifles with A1/A2 buffer tube. Carbine fits collapsible M4-type carbine-length buffer tube. 308 Rifle – Fits AR10 and 308 AR fixed stock rifles with an A1/A2 buffer tube. 308 Carbine – fits AR10 and 308 AR carbine buffer tubes. JP Enterprises recommends the use of JP Tuned and Polished 308 Buffer Springs when using the JP 308 Low Mass Bolt Carrier Group
Liczba ocen: 11
Od brownells.com: 11
Średnia ocena: 4,9
IT WORKS!(28-04-2017)
Built an AR308 with a standard 308 carbine buffer spring in a Magpul CTR stock. Would only lock back the bolt carrier about 50% of the time after the last round. Installed this spring and now get lock back after the last round 100%. Used a standard 3.7oz buffer both times. Problem solved!
308 Rifle Flat-Wire Buffer Spring(22-03-2014)
I replaced the factory round buffer spring in a new Remington R-25, 7MM-08 with this buffer spring because of multiple feeding and extraction problems. I fired 100 rounds, fast and slow, without any malfunctions what-so-ever.
Excellent Product(20-02-2012)
In Canada, we can buy Norinco AR's. Although well built, the finer points are missed. One of those is final fit/finish/quality on some things. Gun worked great, but adding this, smooth consistent cycling, and the brass all went in the same area. It did minimize the buffer tube noise as well.
No more ringing sound at all - amazing(03-04-2012)
Installed this spring with a tiny bit of grease for lubrication, and it works amazing. Just as promised. Gun feels nice and solid when I shoot it, and I don't feel or hear any of the spring action anymore. I ran this with a spikes heavy buffer.
Nice!(18-11-2013)
I've used this spring in multiple carbine builds and a pistol; both in conjunction with standard, H2 and Spike's T2 buffers. Never had any issue with cycling. A top quality upgrade.
Great part(26-03-2015)
Great product, great price. Highly recommended.
Works well, but short life.(16-07-2018)
Very nice part, but low life expectancy. Did not see anything on JP's site or anyone mention on here, but on the card I got with the spring the recommended replacement is only 5,000 rds. I don't consider my self to shoot much, but 5k rds comes quick and was disappointed to see that after I got it. That said it works very comparably to the flat springs I have and have yet to hear any spring noise when firing.
Great Spring(04-04-2012)
I use this spring with the AR-Restor buffer. It has tamed my .50 Beowulf more than I thought possible!
Great buy(04-02-2014)
Excellent spring, takes alot of the "chung" out of the action. The extra power of this spring really drives the bolt home.
These work(31-01-2016)
Have used these springs in my own rifles, installed in customers rifles, never had a complaint. Just ordered a couple more to have them in stock.
Quiet (24-08-2016)
I have liked shooting AR's, but always hated the "boing" and rattle. When I built my own, I decided to eliminate those noises. Between the Spikes Tactical tungsten buffer and a JP Enterprises tuned spring, the only mechanical noise is from the bolt movement. Pure joy!
452000118 Tuned Buffer Spring, Rifle Numer części: JPSOSR812872020907 Precyzyjne, bezśrodkowe i polerowane sprężyny robocze zapewniają płynniejszą i cichszą pracę w buforowych rurkach AR. Lepsze odczucie impulsu powoduje szybsze przywracanie wzroku i większą niezawodność. Średnica zewnętrzna jest szlifowana i polerowana, aby zapewnić płynny i cichy ruch w rurze buforowej. Karabin pasuje do karabinów stacjonarnych z tuleją buforową A1 / A2. Karabinek pasuje do składanej rurki buforowej typu M4. Karabin 308 - Pasuje do karabinów stacjonarnych AR10 i 308 AR z tuleją buforową A1 / A2. 308 Carbine - pasuje do rurek buforowych AR10 i 308 AR. JP Enterprises zaleca stosowanie sprężyn buforowych JP Tuned i Polished 308 w przypadku grupy nośników śrubowych JP 308 o niskiej masie
Made in USA
US export classification: I(h)
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
452000119 Tuned Buffer Spring, Carbine Numer części: JPSOSC812872020921 Precyzyjne, bezśrodkowe i polerowane sprężyny robocze zapewniają płynniejszą i cichszą pracę w buforowych rurkach AR. Lepsze odczucie impulsu powoduje szybsze przywracanie wzroku i większą niezawodność. Średnica zewnętrzna jest szlifowana i polerowana, aby zapewnić płynny i cichy ruch w rurze buforowej. Karabin pasuje do karabinów stacjonarnych z tuleją buforową A1 / A2. Karabinek pasuje do składanej rurki buforowej typu M4. Karabin 308 - Pasuje do karabinów stacjonarnych AR10 i 308 AR z tuleją buforową A1 / A2. 308 Carbine - pasuje do rurek buforowych AR10 i 308 AR. JP Enterprises zaleca stosowanie sprężyn buforowych JP Tuned i Polished 308 w przypadku grupy nośników śrubowych JP 308 o niskiej masie
452000151 Tuned and Polished Buffer Spring, 308 Rifle Numer części: JPSOSR308812872020914 Precyzyjne, bezśrodkowe i polerowane sprężyny robocze zapewniają płynniejszą i cichszą pracę w buforowych rurkach AR. Lepsze odczucie impulsu powoduje szybsze przywracanie wzroku i większą niezawodność. Średnica zewnętrzna jest szlifowana i polerowana, aby zapewnić płynny i cichy ruch w rurze buforowej. Karabin pasuje do karabinów stacjonarnych z tuleją buforową A1 / A2. Karabinek pasuje do składanej rurki buforowej typu M4. Karabin 308 - Pasuje do karabinów stacjonarnych AR10 i 308 AR z tuleją buforową A1 / A2. 308 Carbine - pasuje do rurek buforowych AR10 i 308 AR. JP Enterprises zaleca stosowanie sprężyn buforowych JP Tuned i Polished 308 w przypadku grupy nośników śrubowych JP 308 o niskiej masie
452000152 Tuned and Polished Buffer Spring, 308 Carbine Numer części: JPSOSC308812872020938 Precyzyjne, bezśrodkowe i polerowane sprężyny robocze zapewniają płynniejszą i cichszą pracę w buforowych rurkach AR. Lepsze odczucie impulsu powoduje szybsze przywracanie wzroku i większą niezawodność. Średnica zewnętrzna jest szlifowana i polerowana, aby zapewnić płynny i cichy ruch w rurze buforowej. Karabin pasuje do karabinów stacjonarnych z tuleją buforową A1 / A2. Karabinek pasuje do składanej rurki buforowej typu M4. Karabin 308 - Pasuje do karabinów stacjonarnych AR10 i 308 AR z tuleją buforową A1 / A2. 308 Carbine - pasuje do rurek buforowych AR10 i 308 AR. JP Enterprises zaleca stosowanie sprężyn buforowych JP Tuned i Polished 308 w przypadku grupy nośników śrubowych JP 308 o niskiej masie
Dodatkowa moc dla płynniejszej, cichszej i bardziej niezawodnej jazdy na rowerze
Precyzyjne, bezśrodkowe i polerowane sprężyny robocze zapewniają płynniejszą i cichszą pracę w buforowych rurkach AR. Lepsze odczucie impulsu powoduje szybsze przywracanie wzroku i większą niezawodność. Średnica zewnętrzna jest szlifowana i polerowana, aby zapewnić płynny i cichy ruch w rurze buforowej. Karabin pasuje do karabinów stacjonarnych z tuleją buforową A1 / A2. Karabinek pasuje do składanej rurki buforowej typu M4. Karabin 308 - Pasuje do karabinów stacjonarnych AR10 i 308 AR z tuleją buforową A1 / A2. 308 Carbine - pasuje do rurek buforowych AR10 i 308 AR. JP Enterprises zaleca stosowanie sprężyn buforowych JP Tuned i Polished 308 w przypadku grupy nośników śrubowych JP 308 o niskiej masie
SPECYFIKACJE: Stal, polerowane wykończenie. Karabin - długość 34 cm. Karabinek - długość 30 cm.
Więcej...
Extra Power For Smoother, Quieter, More Reliable Cycling
Precision centerless ground and polished operating springs offer a smoother and quieter operation in AR buffer tubes. Improved impulse feel results in faster sight recovery and improved reliability. Outer-diameter is ground and polished for smooth, quiet movement in the buffer tube. Rifle fits fixed stock rifles with A1/A2 buffer tube. Carbine fits collapsible M4-type carbine-length buffer tube. 308 Rifle – Fits AR10 and 308 AR fixed stock rifles with an A1/A2 buffer tube. 308 Carbine – fits AR10 and 308 AR carbine buffer tubes. JP Enterprises recommends the use of JP Tuned and Polished 308 Buffer Springs when using the JP 308 Low Mass Bolt Carrier Group
Liczba ocen: 11
Od brownells.com: 11
Średnia ocena: 4,9
IT WORKS!(28-04-2017)
Built an AR308 with a standard 308 carbine buffer spring in a Magpul CTR stock. Would only lock back the bolt carrier about 50% of the time after the last round. Installed this spring and now get lock back after the last round 100%. Used a standard 3.7oz buffer both times. Problem solved!
308 Rifle Flat-Wire Buffer Spring(22-03-2014)
I replaced the factory round buffer spring in a new Remington R-25, 7MM-08 with this buffer spring because of multiple feeding and extraction problems. I fired 100 rounds, fast and slow, without any malfunctions what-so-ever.
Excellent Product(20-02-2012)
In Canada, we can buy Norinco AR's. Although well built, the finer points are missed. One of those is final fit/finish/quality on some things. Gun worked great, but adding this, smooth consistent cycling, and the brass all went in the same area. It did minimize the buffer tube noise as well.
No more ringing sound at all - amazing(03-04-2012)
Installed this spring with a tiny bit of grease for lubrication, and it works amazing. Just as promised. Gun feels nice and solid when I shoot it, and I don't feel or hear any of the spring action anymore. I ran this with a spikes heavy buffer.
Nice!(18-11-2013)
I've used this spring in multiple carbine builds and a pistol; both in conjunction with standard, H2 and Spike's T2 buffers. Never had any issue with cycling. A top quality upgrade.
Great part(26-03-2015)
Great product, great price. Highly recommended.
Works well, but short life.(16-07-2018)
Very nice part, but low life expectancy. Did not see anything on JP's site or anyone mention on here, but on the card I got with the spring the recommended replacement is only 5,000 rds. I don't consider my self to shoot much, but 5k rds comes quick and was disappointed to see that after I got it. That said it works very comparably to the flat springs I have and have yet to hear any spring noise when firing.
Great Spring(04-04-2012)
I use this spring with the AR-Restor buffer. It has tamed my .50 Beowulf more than I thought possible!
Great buy(04-02-2014)
Excellent spring, takes alot of the "chung" out of the action. The extra power of this spring really drives the bolt home.
These work(31-01-2016)
Have used these springs in my own rifles, installed in customers rifles, never had a complaint. Just ordered a couple more to have them in stock.
Quiet (24-08-2016)
I have liked shooting AR's, but always hated the "boing" and rattle. When I built my own, I decided to eliminate those noises. Between the Spikes Tactical tungsten buffer and a JP Enterprises tuned spring, the only mechanical noise is from the bolt movement. Pure joy!