Cechy
- Waga dostawy: 0,045kg
- Wysokość wysyłki: 10mm
- Szerokość wysyłki: 79mm
- Długość wysyłki: 155mm
- UPC: 050806023246
Nr produktu: 587036967
050806023246 Pierwotnie zaprojektowane dla metalowców i mechaników do usuwania zaciętych śrub, te wytrzymałe ekstraktory wgryzają się w metal, zapewniając dodatkową przyczepność, dzięki czemu możesz zastosować siłę potrzebną do usunięcia chokera, który nie chce się ruszyć przy użyciu zwykłych narzędzi. Dostępne dla 12 i 20 gauge. Dołączone pełne instrukcje. Uwaga: niewłaściwe użycie może spowodować uszkodzenie lufy.Oryginalnie zaprojektowane dla metalowców i mechaników do usuwania zaciętych śrub, te wytrzymałe ekstraktory wgryzają się w metal, co zapewnia dodatkową przyczepność, dzięki czemu możesz zastosować siłę potrzebną do usunięcia choke'a, który nie chce się ruszyć przy użyciu zwykłych narzędzi. Dostępne dla kalibrów 12 i 20.
Uwaga: uszkodzenie lufy może wystąpić, jeśli narzędzie będzie używane nieprawidłowo. Do zestawu dołączone są pełne instrukcje.
Didn't work 12-08-2014
I tried to remove a stuck choke tube from a Bennelli shotgun with no luck at all. I had previously talked with a Brownell's consultant and was told to follow the written instructions that came with the tool. I did that to the letter. The cutting edges of the tool were softer than the choke tube metal and merely broke away as I tried to twist the tool.
I finally had to try another method of removal which I found on Youtube. I used JB Weld to glue in a deep well socket that was about 1/8 of an inch smaller in diameter than the choke tube. After letting it set up for 24 hours I used a ratchet to remove the socket which bonded to the choke tube.
I would return the tool to Brownells except that postage would cost as much as the tool.
Worked well 02-04-2014
I had an inventor DS choke tube stuck in an A5 thats about a year old. Tried everything to get the choke out to the point where wrenches wore the notches on the tube.
I bought this tool as a hail mary before relenting and going to a gunsmith. It took a couple tries and tapping the tool in harder, but with a crescent wrench and a couple sharp raps with a hammer to the tool was finally able to get the tube out. No damage to barrel, choke was not any more messed than before, junking it though.
You might have drive the tool in a little harder than you think.
Good price shipping was good, fedex is always good.
Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.