Twój koszyk jest pusty.

Koszyk

HOGUE
AR-15 PISTOL GRIP

743108150009 408150000

Powierzchnia zapewniająca pewny chwyt; Zwiększa komfort

Mocny, wzmocniony włóknem szklanym wkład idealnie przylega do ramy, jest odporny na zużycie, nie poluzuje się. Ortopedyczny design z wypukłościami pod dłoń i rowkami na palce zmniejsza wstrząsy, zwiększa komfort strzelania; zachowuje wygląd standardowej kolby.

DANE TECHNICZNE: Rdzeń z włókna szklanego, pokryty gumą.

Więcej...

Non-Slip Grip Surface; Increases Comfort

Strong, fiberglass insert fits solidly against the frame, resists wear, won’t loosen. Orthopedic design with palm swells and finger grooves reduces shock, increases shooting comfort; maintains a stock appearance.

SPECS: Fiberglass core, rubber covered.

Więcej...

Oceny klientów dla HOGUE PISTOL GRIP RUBBER BLACK

Liczba ocen: 29
Od brownells.com: 29
Średnia ocena: 4,8

Hogue AR 15 PISTOL GRIP (07-04-2014)

THIS IS THE VULCAN CHAIN GUN OF PISTOL GRIPS. IT REALLY DOESNT GET ANY BETTER.

Great grip, great price! (05-09-2009)

I have this grip on my RRA .223 and my DPMS LR-308 and I would not use anything else. I have very large hands and the grip still fits perfectly. Others that have shot my rifles with average sized hands like it as well. The only thing that makes it better is the price! I would not change a thing.

Overmolded Grip (23-09-2009)

This gip is a big improvement over the plastic factory grips. Very comfortable and keeps your hand from moving around on the grip.

Really comfortable! (09-11-2009)

Simply a very comfortable grip that any handsize works well with! Easy to replace your old grip with.

JoniJo (12-11-2009)

All you need is a screwdriver. Fit my DPMS perfectly. Great ergonomics!

Quality Product (28-01-2010)

Easy to use, good control, feels like a rubber skin has been applied to factory A2 grip. Only complaint is position of finger ridges can rub fingers raw depending on finger size after extended shooting.

Works great (28-02-2010)

I tried other grips aimed at the tactical crowd. I found them to be overly bulbous, even without gloves.

So I picked up one of these... I like the rubberized texture over the standard A2 grip. It feel like it will be easier to manipulate the rifle. It also seems like it will hold up to moderate abuse.

Comfortable Grip at an Affordable Price! (14-03-2010)

I originally dicovered this grip because it came stock on my dad's Ruger SR-556. After shooting it, I was impressed with how comfortable it was. When I decided to build an AR-15 of my own, I knew immediately what grip was going on it. It was just as easy to install as any other AR grip and despite being under $20, it is very high quality. You could definately shoot all day with this grip and not get sore. I will definately be purchasing a Hogue grip for my Ruger Security Six.

no slip grip (02-05-2010)

this is a great grip if your looking to replace the current grip on an ar style rifle,this grip is a little thicker than the std polymer grip and the rubber insures a no slip grip in rain,snow,mud or sweat. and it don't rub your fingers raw after an extended day at the range. semper fi!!!!!

Perfect fit in the hand (18-08-2010)

The hogue grip fits in your hand perfect without any discomfort,with other the hard plastic and shrp edges cut into your hand after long periods of use,THIS ONE DOES NOT,it's soft rubber feels very good in your hand no matter how long you have to carry it.

Awesome grip a must have! (07-10-2010)

Great AR grip! Fit my hand very well and has awesome positive feel and control. Installed on DPMS LR-308B in less than 2 minutes. Fit was tight and excellent. Safety detent spring hole drilled to perfect depth and no problems experienced with safety lever hitting grip. In my opinion a must have on this weapon platform type!

Hogue knows what up. (06-11-2010)

Excellent replacement grip for my AR. Comfortable rubber coating makes shooting a joy. I will be using this on all my future builds. I just wish they send a screw and lock washer with it.

wont use anything else (07-12-2010)

Have these on both of my AR's and an extra to take to work. Easy to install, comfortable, fits my hand and durable.

cant go wrong (09-01-2011)

what can i say? hogue makes great stuff that just molds to my hand like it was made for it.

Phenominal Grip! (30-01-2011)

I've used Hogue products for years and have never ever been disappointed. The grip on my Bushmaster M4 is one I used to take off and put on my work weapon; it has been through tours in Iraq and Afghanistan and still looks and functions like new. There are a lot of other grips out there - but this one will NOT let you down. I even picked up one for my converted Saiga 12!

Colt LE carbine (25-08-2011)

Fit perfect as they always do for me. I have gunsmith training, but this is a no'brainer! Stock screw worked with it so nothing to buy! Any flat tip screwdriver (med. length) will work for the install. I have this brand on most of my guns, the shooters at least. My freinds also (42 guns)And they always fit and work perfectly. The grip size works for me, adult male, and my eight year old daughter. Highest Recommendation!

Minor fitting required for me. (02-12-2011)

Excellent grip & works well without fitting on a Colt AR-15. I purchased this grip for a Lewis Machine & Tool AR and the fire selector switch rubs against the top portion of the grip. It needed to be slightly trimmed on the inside in order for the proper clearance.

Great Addition (05-01-2012)

This is a great addition to my AR. It is a breeze to install and was quite an upgrade from the stock grip that came with the gun. Great gripping ability and the palm swells are nice as well. Great quality for the money.

Very Comfortable! (24-02-2012)

This is a great feeling grip. I also had to trim it with a razor in order to let the safety lever move freely on my m&p sport. No big deal, prefit it, mark it with a pencil and trim it to fit.

Does the trick (24-06-2012)

To put it simply-this grip feels right. Fits my hand well. Installs easily. Looks good, and feels sturdy.

Nice!!! Lots of grip!! (02-11-2012)

I've had all the big name brands grips before and this one beats them all! Very good feel in your hand, and looks good too! Definitely worth buying...

Great Grip (21-02-2013)

Grip fit perfectly. Has a great feel and is not slippery. Much more comfortable than the stock grip. Definitely what I expected from a Hogue grip.

Great Grip (20-04-2013)

Great grip no slip, fit my smaller hand grip.

May need trimming and/or drilling. (21-10-2013)

I am surprised some people reported having no issues with this grip rubbing the selector when so many others have had that exact problem. Dimensionally speaking almost everybody should have that problem as this grip is thicker than the standard A2 grip. While most people stated they trimmed the rubber off the grip to allow clearance, I opted to file the rear of the selector at a slight angle so that it could clear the grip but not interfere with appearance or the function of the selector stops. A quick touch up with some cold blue and everything looks factory fresh.

I also had the problem with the pocket hole for the selector spring being too shallow. Sure, it was only about 1/16" but it caused enough extra compression on the selector spring to make flipping the selector a real bear. Using a spare A2 grip I had lying around I marked a drill bit at the proper depth and then drilled my Hogue to match. Now my selector snaps into place smooth as silk.

Like everything I've ever seen that Hogue makes, this is a fine piece of craftsmanship. Just be aware that it may need a tweak or two to get it the way you want it.

Also, I should mention: If you do need to trim the grip or selector do it right away and resist the urge to keep working the selector as it rubs the grip. The spot where it rubs seems to leave a permanent rub mark on the grip which is small, but kind of ugly. This isn't an issue if you just plan to trim the rubber off, but if you opt to recontour the selector instead you won't want to leave the traces of the ill fit behind for all to see.

Great grip, but no hardware (12-03-2014)

One of the best grips I've ever used on an AR. Only complaint is that there wasn't any mounting hardware in the package.

Looks good, comfortable (20-06-2015)

I have small girly hands, a mans medium, and this grip fits fine.

No fat feel and much more comfortable than stock. Like another reviewer I did have to trim the back of the selector lever to prevent it from dragging on the grip but no biggie, I just ground a bit off the backside of the lever and dabbed a bit bluing on it and now it works just fine and still looks good with no trimming done to the grip. I still give it 5 stars because isn't that why we are here, we like guns and like to tinker with them?

I saw that one reviewer complained that it didn't come with any hardware and I fail to see what the problem is since you will be replacing your stock handgrip and you would already have the hardware parts you need on your gun. If you are building a new lower your parts kit will have the hardware in it also. I do wish it had a cap to close off the end so that the grip could be used for some simple storage like an extra battery for the sight or ear plugs but I wont complain about that with the budget price of this grip. I will be using these on all my future builds.

Simple, effective and cheap improvement (25-12-2015)

Fit my Colt AR perfect. No modifications or trimming needed. I don't have massive hands, but the standard grip was just too small anyway. Trigger finger would naturally want to extend way past the trigger. The extra bulk from this grip brings the pad on the end of my finger directly onto the trigger, as it should be. Took all of a minute to install.

Kinda want to chew on it. (28-05-2017)

Grip fit on several of my lowers, was ok but just a little to rubbery for me. I found that I prefer the Magpul rubber coated MOE+.

There is nothing wrong with the Hogue, just my preference.

Only Grip You Need (31-01-2018)

Installed this on my AR15 6yrs ago and it is still soft and tactile as the day I bought it. Fills your hand more than a standard grip and the comfort is great. I will be putting this grip on all my further AR builds and I recommend you do too!

Zobacz 29 dodatkowych opinii na brownells.com

179 179 2 PLN

Nr produktu: 408150000
HOGUE PISTOL GRIP RUBBER BLACK
Numer części: 15000 743108150009 Mocny, wzmocniony włóknem szklanym wkład idealnie przylega do ramy, jest odporny na zużycie, nie poluzuje się. Ortopedyczny design z wypukłościami pod dłoń i rowkami na palce zmniejsza wstrząsy, zwiększa komfort strzelania; zachowuje wygląd standardowej kolby.

179 PLN 173 179,00 zł *

Czas dostawy ok. 14-21 dni.
Ponad 10 sztuk w magazynie w USA

Specyfikacja: Color: Black Make: AR-15 Material: Polymer, Rubber

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Cechy

Kolor: Black Materiał: Polymer,Rubber Wytwórca: AR-15 Waga dostawy: 0,113kg Wysokość wysyłki: 38mm Szerokość wysyłki: 94mm Długość wysyłki: 157mm

Szczegóły pozycji

US export classification: 0A501.y.1

Nr produktu: 408000111
HOGUE PISTOL GRIP RUBBER TAN
Numer części: 15003 743108150030 Mocny, wzmocniony włóknem szklanym wkład idealnie przylega do ramy, jest odporny na zużycie, nie poluzuje się. Ortopedyczny design z wypukłościami pod dłoń i rowkami na palce zmniejsza wstrząsy, zwiększa komfort strzelania; zachowuje wygląd standardowej kolby.

179 PLN 18 179,00 zł *

Czas dostawy ok. 14-21 dni.
Ponad 10 sztuk w magazynie w USA

Specyfikacja: Color: Tan Make: AR-15 Material: Polymer, Rubber

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Powierzchnia zapewniająca pewny chwyt; Zwiększa komfort

DANE TECHNICZNE: Rdzeń z włókna szklanego, pokryty gumą.

Więcej...

Non-Slip Grip Surface; Increases Comfort

SPECS: Fiberglass core, rubber covered.

Więcej...

Oceny klientów dla HOGUE PISTOL GRIP RUBBER BLACK

Liczba ocen: 29
Od brownells.com: 29
Średnia ocena: 4,8

Hogue AR 15 PISTOL GRIP (07-04-2014)

THIS IS THE VULCAN CHAIN GUN OF PISTOL GRIPS. IT REALLY DOESNT GET ANY BETTER.

Great grip, great price! (05-09-2009)

Overmolded Grip (23-09-2009)

This gip is a big improvement over the plastic factory grips. Very comfortable and keeps your hand from moving around on the grip.

Really comfortable! (09-11-2009)

Simply a very comfortable grip that any handsize works well with! Easy to replace your old grip with.

JoniJo (12-11-2009)

All you need is a screwdriver. Fit my DPMS perfectly. Great ergonomics!

Quality Product (28-01-2010)

Works great (28-02-2010)

Comfortable Grip at an Affordable Price! (14-03-2010)

no slip grip (02-05-2010)

Perfect fit in the hand (18-08-2010)

Awesome grip a must have! (07-10-2010)

Hogue knows what up. (06-11-2010)

Excellent replacement grip for my AR. Comfortable rubber coating makes shooting a joy. I will be using this on all my future builds. I just wish they send a screw and lock washer with it.

wont use anything else (07-12-2010)

Have these on both of my AR's and an extra to take to work. Easy to install, comfortable, fits my hand and durable.

cant go wrong (09-01-2011)

what can i say? hogue makes great stuff that just molds to my hand like it was made for it.

Phenominal Grip! (30-01-2011)

Colt LE carbine (25-08-2011)

Minor fitting required for me. (02-12-2011)

Great Addition (05-01-2012)

Very Comfortable! (24-02-2012)

This is a great feeling grip. I also had to trim it with a razor in order to let the safety lever move freely on my m&p sport. No big deal, prefit it, mark it with a pencil and trim it to fit.

Does the trick (24-06-2012)

To put it simply-this grip feels right. Fits my hand well. Installs easily. Looks good, and feels sturdy.

Nice!!! Lots of grip!! (02-11-2012)

I've had all the big name brands grips before and this one beats them all! Very good feel in your hand, and looks good too! Definitely worth buying...

Great Grip (21-02-2013)

Grip fit perfectly. Has a great feel and is not slippery. Much more comfortable than the stock grip. Definitely what I expected from a Hogue grip.

Great Grip (20-04-2013)

Great grip no slip, fit my smaller hand grip.

May need trimming and/or drilling. (21-10-2013)

Great grip, but no hardware (12-03-2014)

One of the best grips I've ever used on an AR. Only complaint is that there wasn't any mounting hardware in the package.

Looks good, comfortable (20-06-2015)

Simple, effective and cheap improvement (25-12-2015)

Kinda want to chew on it. (28-05-2017)

Grip fit on several of my lowers, was ok but just a little to rubbery for me. I found that I prefer the Magpul rubber coated MOE+.

There is nothing wrong with the Hogue, just my preference.

Only Grip You Need (31-01-2018)

Zobacz 29 dodatkowych opinii na brownells.com

Sugerowane pozycje
Klienci kupili także

BROWNELLS LOW-PROFILE SLING ADAPTER
CAR-15/M4 LOW-PROFILE AMBIDEXTROUS SLING ADAPTER

BROWNELLS

W magazynie

69,00 zł *

Taktyczne zaczepy do pasów

3,2

BROWNELLS OVERSIZED MAGAZINE RELEASE BUTTON
AR-15/M16 OVERSIZED MAGAZINE RELEASE BUTTON

BROWNELLS

Zamówione ponownie

159,00 zł *

Zatrzaski magazynków

3,4

KNIGHTS ARMAMENT FORWARD VERTICAL GRIP BLACK
PICATINNY VERTICAL GRIP

KNIGHTS ARMAMENT

Zamówione ponownie

509,00 zł *

Chwyty przednie pionowe

AERO PRECISION AR 308 M5 LOWER PARTS KIT W/ MOE GRIP FDE
AR 308 M5 LOWER PARTS KITS W/ MOE GRIP

AERO PRECISION

W magazynie

809,00 zł *

COLT AR-15 ADJUSTABLE CARRYING HANDLE ASSEMBLY BLACK
AR-15 CARRYING HANDLE ASSEMBLY

COLT

W magazynie

1 119,00 zł *

Celowniki

4,5

Zaloguj się

Nie pamiętasz hasła?
Zarejestruj się

Kontakt

Facebook

Mapa strony

Kategorie produktów

Zamawianie

Obsługa klienta

Witamy!

Witamy w brownells.pl wiodącym dostawcy w Polsce akcesoriów do broni, części broni, narzędzi rusznikarskich, narzędzi do elaboracji amunicji oraz komponentów.

Co oferujemy

Lubisz strzelać, pracujesz przy naprawach broni zawodowo lub hobbystycznie lub po prostu jesteś właścicielem broni, to nasza strona jest właśnie dla Ciebie!

Przez ponad 75 lat strzelcy, rusznikarze, hobbyści, wojskowi, służby specjalne korzystają z usług Brownells jako dostawcy szerokiego asortymentu, wysokiej jakości części broni. Znajdziesz ponad 90 000 produktów w tym części nietypowe, akcesoria, narzędzia rusznikarskie i inne produkty do utrzymania, naprawy i ulepszania swojej broni.