Twój koszyk jest pusty.

Koszyk

EGW
1911 COMPETITION SEAR

841370100347 296100002

Niezwykle Twarda, Obrabiana Zębatka ze Stali Narzędziowej Dla Trwałych Spustów o Jakości Sportowej

Niezwykle twardy zębatka zapewnia czyste, lekkie uczucie spustu bez konieczności długotrwałego szlifowania – w wielu przypadkach może być zainstalowany prosto z opakowania. Precyzyjnie obrabiana metodą CNC ze stalowego pręta narzędziowego, a następnie szlifowana dla dokładnej geometrii, aby zapewnić właściwy kąt zębatki dla pełnego zaangażowania młotka/zębatki. Hartowana do Rc 55 dla wyjątkowo długiej żywotności, dzięki czemu praca nad spustem będzie trwała dłużej.

SPECYFIKACJA: Obrabiana stal narzędziowa, w stanie surowym. Pasuje tylko do pistoletów 1911 Auto.

Więcej...

Ultra-Hard, Machined Tool Steel Sear For Long-Lasting Match-Quality Triggers

Ultra-hard sear gives a clean-breaking, light-feeling trigger pull with little or no time-consuming stoning—can be installed straight out of the package in many cases. Precision CNC-machined from tool steel barstock, then ground for precise geometry to ensure correct sear angle for full hammer/sear engagement. Hardened to Rc 55 for exceptionally long life, so your trigger job lasts longer.

SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.

Więcej...

Oceny klientów dla EGW 1911 AUTO SEAR

Liczba ocen: 14
Od brownells.com: 14
Średnia ocena: 5

Great Product (18-04-2011)

I installed an EGW sear in my 1911 Springfield Armory project gun and I couldn't be happier with the result. I bought the sear along with the Brownells sear jig and an extra-fine stone.
After stoning in the jig and cutting the relief angle, the sear installed in a snap, passed function testing, and fired 150 rounds...superb performance! Used with a Wilson ultra-light hammer with hooks @ 0.20.

EGW 1911 Auto Sear (11-08-2011)

EGW is the best 1911 sear you can use. Fully manufactured in house and hardened to a point that will outlast the gun itself, takes a honed edge and holds it. A must have in any 1911.

EGW Sear (12-10-2011)

The best sear to ever hit the market. As with all EGW products they do it right the first time and offer only one grade product at a very reasonable price. Not three sears and hammers like the big name smiths with economy, mid range and pre bullet proof or hard core as these are the best. Perfect hardness and hold an edge for the life of the gun and the next one to follow with 100000s rounds +. Can be used with no relief and short hooks or a relief angle and a well tuned matching EGW hammer for the best of the best combination.

Best sear on the market (26-01-2012)

I've used various sears, but this one is the best. It is not the lightest, but it is the hardest. This one will last forever. I recommend this sear for any trigger weight down to about 2 lbs., so this is the one for you probably 99% of the time.

Highly Advise, excellent sear! (24-05-2012)

Nice sear required very little stoning to get it into shape. Thumb safety operation ok after installing this sear into pistol.

This product delivers. (16-08-2012)

I bought this sear based on the feedback I read. Everything was true. This is a quality part. Perfect dimensions, The breakaway angle is already cut, the contact face is polished and super hard. I matched this up with my favorite hammer, Wilson's Ultra Light Match Hammer at 20/1000ths. I easily got a safe, 2 1/2 lb. trigger on my Springfield TRP. Impressive product from EGW.

Excellent Sear (13-04-2013)

Replaced my factory Colt XSE with this sear and the results are amazing. This sear came polished with the correct angles and NO work to be done. My trigger pull fell to 3.5 lbs. In addition you get the very hard steel that will last many years and not lose its sear angles.
Thumb safety fit back in perfect with no adjustment needed.
Great Sear, I highly recommend it!

Nothing better... (16-06-2013)

Title says it all. Perfect consistency in finish and dimension means I can count on the EGW sear to fit exactly how I expect it to, without even having it in my hands. More than long enough to use with a TR sear jig if you choose.
Had the hardness independently checked... and it's spot on. I keep 3-4 on hand at all times... and if I measured the nose length on all 4, I doubt they'd be more than .0002" of each other in variance. Iv'e actually been using these for over 15 years, just got around to reviewing. Perfect compliment to the ball head disco.

This is THE ONE !! (25-01-2014)

IF you have no apptitude for polishing sear angles (like me)this sear is as good as it gets. I tried using an STI but the safety pad was WAY too big and I got sear bounce. The EGW dropped right in and coupled with a Colt sear spring got me a clean 3lb trigger on my SA Loaded.Best 1911 part I've ever bought,period.

The Industry's Finest Sear! (10-07-2015)

My business specializes in repair, customization and custom builds of 1911s. The geometry, fit and function of this Sear is superior to all others on the market, and I've tried them all! As stated earlier in another write up, best results will be obtained with mating to either an EGW Hammer, or to another parts manufacturer's 1911 Hammer, which uses the same dimensional geometry as EGW's (Hint: Their name begins with the letter "A"). The EGW Sear's heat treating and finish is without peer!! An extraordinary value!!

Quality sear (04-08-2015)

The stock trigger pull on my Ruger CMD was about 5.5lbs with some creep and grittiness. The EGW sear dropped in with no fitting and combined with a 19lb mainspring and a Colt sear spring I have a clean break with zero creep and its much lighter. I'm buying another to install in my Springfield.

Drop in, no smithing, much smoother pull (19-11-2015)

Remington 1911 R1. Stock trigger had a rough pull. Before buying the full trigger job kit, I wanted to try a simpler solution. The EGW sear dropped right in and made a major improvement. Zero smithing required.

On a side note, I also tried installing the series 80 to 70 conversion. That didn't do it, but the new sear did.

EGW they mean what they say (13-08-2017)

I look at what's out there and with out mentioning any names its not so much the product as the customer service, and I understand that people are very busy in their smithing and machining work that there is little time for chet chat but when I ever needed advice on a product or have a problem and leave a message they always come back with an answer ready to help, yup EGW they get the job done, thanks EGW.

Very nice 1911 sear (26-08-2018)

This is a very nice and tough sear. Out of the bag, it requires virtually zero stoning, or other fitting. I've used this in a re-build, with new trigger, disconnect, hammer and sear spring, and it really makes the trigger just right. No slop, no creep, nice clean break. Hope that info helps!

Zobacz 14 dodatkowych opinii na brownells.com

219 219 1 PLN

Nr produktu: 296100002
EGW 1911 AUTO SEAR
Numer części: 10040 841370100347 Niezwykle twardy zębatka zapewnia czyste, lekkie uczucie spustu bez konieczności długotrwałego szlifowania – w wielu przypadkach może być zainstalowany prosto z opakowania. Precyzyjnie obrabiana metodą CNC ze stalowego pręta narzędziowego, a następnie szlifowana dla dokładnej geometrii, aby zapewnić właściwy kąt zębatki dla pełnego zaangażowania młotka/zębatki. Hartowana do Rc 55 dla wyjątkowo długiej żywotności, dzięki czemu praca nad spustem będzie trwała dłużej.

219 PLN 114 219,00 zł *

Czas dostawy ok. 14-21 dni.
Ponad 10 sztuk w magazynie w USA

Specyfikacja: Make: 1911 Model: Government, Commander, Officers

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Cechy

Model: Officers,Commander,Government Wytwórca: 1911 Waga dostawy: 0,005kg Wysokość wysyłki: 8mm Szerokość wysyłki: 76mm Długość wysyłki: 124mm

Szczegóły pozycji

Made in USA
US export classification: 0A501.c

Niezwykle Twarda, Obrabiana Zębatka ze Stali Narzędziowej Dla Trwałych Spustów o Jakości Sportowej

SPECYFIKACJA: Obrabiana stal narzędziowa, w stanie surowym. Pasuje tylko do pistoletów 1911 Auto.

Więcej...

Ultra-Hard, Machined Tool Steel Sear For Long-Lasting Match-Quality Triggers

SPECS: Machined tool steel, in-the-white. Fits 1911 Auto only.

Więcej...

Oceny klientów dla EGW 1911 AUTO SEAR

Liczba ocen: 14
Od brownells.com: 14
Średnia ocena: 5

Great Product (18-04-2011)

EGW 1911 Auto Sear (11-08-2011)

EGW is the best 1911 sear you can use. Fully manufactured in house and hardened to a point that will outlast the gun itself, takes a honed edge and holds it. A must have in any 1911.

EGW Sear (12-10-2011)

Best sear on the market (26-01-2012)

Highly Advise, excellent sear! (24-05-2012)

Nice sear required very little stoning to get it into shape. Thumb safety operation ok after installing this sear into pistol.

This product delivers. (16-08-2012)

Excellent Sear (13-04-2013)

Nothing better... (16-06-2013)

This is THE ONE !! (25-01-2014)

The Industry's Finest Sear! (10-07-2015)

Quality sear (04-08-2015)

Drop in, no smithing, much smoother pull (19-11-2015)

EGW they mean what they say (13-08-2017)

Very nice 1911 sear (26-08-2018)

Zobacz 14 dodatkowych opinii na brownells.com

RECOIL SPRING PLUG FOR SPRINGFIELD ARMORY 1911
1911 RECOIL SPRING PLUG

SPRINGFIELD ARMORY

Zamówione ponownie

54,00 zł *

Zatyczki sprężyny powrotnej

AMERIGLO FOR GLOCK® 17/19/26 GEN5 3-DOT PROGLO SIGHT SET
AGENT NIGHT SIGHT SET FOR GLOCK®

AMERIGLO

Niedostępne

Zestawy przyrządów celowniczych

4,6

AMERIGLO PRO-GLO TRITIUM ROUND FRONT SIGHT .200X.140 ORG FOR GLOCK®
PRO-GLO TRITIUM ROUND FRONT SIGHT 200X140 for GLOCK®

AMERIGLO

W magazynie

349,00 zł *

Muszki

ISMI 19 LB. S/S SPRING, EACH
1911 MAINSPRING

ISMI

W magazynie

59,00 zł * 59,00 zł - 184,00 zł*

Sprężyny uderzeniowe

NOVAK TARGET RING TRITIUM FRONT SIGHT, GOVT. .160" HEIGHT
SEMI-AUTO TRITIUM DOVETAIL FRONT SIGHT GOVERNMENT

NOVAK

W magazynie

379,00 zł *

Muszki

AGENCY ARMS 417 COMP FOR GLOCK® GEN 4, 1/2"X28 GOLD
417 COMPENSATOR FOR GLOCK® GEN 3 & 4

AGENCY ARMS

W magazynie

719,00 zł * 719,00 zł - 749,00 zł*

ED BROWN COMMANDER RECOIL SPRING PLUG, STAINLESS
1911 RECOIL SPRING PLUGS

ED BROWN

W magazynie

104,00 zł * 94,00 zł - 104,00 zł*

Zatyczki sprężyny powrotnej

4,5

COLT 1911 GOVERNMENT 70 REAR SIGHT
1911 GOVERNMENT 70 REAR SIGHT

COLT

Zamówione ponownie

114,00 zł *

Celowniki

CYLINDER & SLIDE BLUE AMBIDEXTROUS SAFETY
1911 HIGH GRIP THUMB SAFETY

CYLINDER & SLIDE

W magazynie

419,00 zł * 244,00 zł - 419,00 zł*

Bezpieczniki

1911 WIDE TENNON FRONT SIGHT - EGW 1911 WIDE TENNON FRONT SIGHT

EGW 1911 WIDE TENNON FRONT SIGHT
1911 WIDE TENNON FRONT SIGHT

EGW

W magazynie

89,00 zł *

Muszki

ED BROWN 1911 FORGED SLIDE STOP STAINLESS
1911 FORGED SLIDE STOP

ED BROWN

W magazynie

409,00 zł * 409,00 zł - 419,00 zł*

Zaczepy zamka

WILSON COMBAT DELUXE BULLET PROOF SEAR
1911 DELUXE BULLET PROOF SEAR

WILSON COMBAT

W magazynie

234,00 zł *

Zaczepy kurkowe

ED BROWN PERFECTION SEAR
1911 PERFECTION SEAR

ED BROWN

W magazynie

244,00 zł *

Zaczepy kurkowe

4,8

Zaloguj się

Nie pamiętasz hasła?
Zarejestruj się

Kontakt

Facebook

Mapa strony

Kategorie produktów

Zamawianie

Obsługa klienta

Witamy!

Witamy w brownells.pl wiodącym dostawcy w Polsce akcesoriów do broni, części broni, narzędzi rusznikarskich, narzędzi do elaboracji amunicji oraz komponentów.

Co oferujemy

Lubisz strzelać, pracujesz przy naprawach broni zawodowo lub hobbystycznie lub po prostu jesteś właścicielem broni, to nasza strona jest właśnie dla Ciebie!

Przez ponad 75 lat strzelcy, rusznikarze, hobbyści, wojskowi, służby specjalne korzystają z usług Brownells jako dostawcy szerokiego asortymentu, wysokiej jakości części broni. Znajdziesz ponad 90 000 produktów w tym części nietypowe, akcesoria, narzędzia rusznikarskie i inne produkty do utrzymania, naprawy i ulepszania swojej broni.