Usuwa wgniecenia na szynach wentylacyjnych strzelb w zaledwie kilka minut. Łatwy w montażu i szybki w użyciu. Mosiężny mostek nie pozostawia śladów na górnej części szyny; stalowe szczęki dostosowują się automatycznie.
SPECYFIKACJE: Mostek; Uszlachetniony mosiądz o długości 3" (7,6 cm) i grubości ¼" (6,3 mm). Szczęki; Uszlachetniona, hartowana stal o długości 1½" (3,8 cm) i szerokości ½" (12,7 mm) w najszerszym miejscu.
Więcej...
Straightens Dented Vent Ribs
Pulls out dented shotgun vent ribs in only minutes. Easy to attach, and quick to use. Brass bridge won't mark top of rib; steel jaws self-adjust.
Liczba ocen: 5
Od brownells.com: 5
Średnia ocena: 5
Cheaper than a new rib!(09-03-2010)
I used this tool to remove two severe dents in the rib of my Ruger O/U. I was very tentative at first, but once I got used to the pressure it worked like a charm. You do have to slightly over tighten to ensure the dent is removed. A heavy hand could convert a dent to a hump. Patience and checking with a steel rule will keep you in a great place.
Handy little tool(10-07-2012)
Neatest thing since a pocket on a shirt. Pulls dinged ribs right up. Like the other reviewer noted, you do need to pull it up a little higher than flat and check it with a flat edge, but works like it's supposed to.
works graet, easy to use (01-12-2014)
I have used this tool about 10 times and it has worked great, easy and fast, One great tool.
Better than a gunsmith (13-06-2015)
Simple to use tool that works! I used this on my baby a Perazzi, did not want to ship the gun off. Prior dent is not noticeable after a bit of cold blue touch up. Use with caution, adjust, measure and repeat.
Christmas surprise (26-12-2016)
Unsightly crimp in my over under vent rib near the mid sight. Took it to three gunsmiths. Two refused to fix it and one wanted $150 and to remove my mid sight mark. I said no and lived with the crimp for a year. Then this Christmas my wife ordered the Murray vent rib tool from Brownells.. Was just going to test the fit of the tool and realized I could fix it. Took me seconds and my barrell was good as new. Every shotgunner with vent ribs needs this tool.
Nr produktu: 563100000 MURRAYS VENT RIB TOOL Numer części: NONE Usuwa wgniecenia na szynach wentylacyjnych strzelb w zaledwie kilka minut. Łatwy w montażu i szybki w użyciu. Mosiężny mostek nie pozostawia śladów na górnej części szyny; stalowe szczęki dostosowują się automatycznie.
439PLN35439,00 zł
*
Czas dostawy ok. 14-21 dni. Ponad 10 sztuk w magazynie w USA
Usuwa wgniecenia na szynach wentylacyjnych strzelb w zaledwie kilka minut. Łatwy w montażu i szybki w użyciu. Mosiężny mostek nie pozostawia śladów na górnej części szyny; stalowe szczęki dostosowują się automatycznie.
SPECYFIKACJE: Mostek; Uszlachetniony mosiądz o długości 3" (7,6 cm) i grubości ¼" (6,3 mm). Szczęki; Uszlachetniona, hartowana stal o długości 1½" (3,8 cm) i szerokości ½" (12,7 mm) w najszerszym miejscu.
Więcej...
Straightens Dented Vent Ribs
Pulls out dented shotgun vent ribs in only minutes. Easy to attach, and quick to use. Brass bridge won't mark top of rib; steel jaws self-adjust.
Liczba ocen: 5
Od brownells.com: 5
Średnia ocena: 5
Cheaper than a new rib!(09-03-2010)
I used this tool to remove two severe dents in the rib of my Ruger O/U. I was very tentative at first, but once I got used to the pressure it worked like a charm. You do have to slightly over tighten to ensure the dent is removed. A heavy hand could convert a dent to a hump. Patience and checking with a steel rule will keep you in a great place.
Handy little tool(10-07-2012)
Neatest thing since a pocket on a shirt. Pulls dinged ribs right up. Like the other reviewer noted, you do need to pull it up a little higher than flat and check it with a flat edge, but works like it's supposed to.
works graet, easy to use (01-12-2014)
I have used this tool about 10 times and it has worked great, easy and fast, One great tool.
Better than a gunsmith (13-06-2015)
Simple to use tool that works! I used this on my baby a Perazzi, did not want to ship the gun off. Prior dent is not noticeable after a bit of cold blue touch up. Use with caution, adjust, measure and repeat.
Christmas surprise (26-12-2016)
Unsightly crimp in my over under vent rib near the mid sight. Took it to three gunsmiths. Two refused to fix it and one wanted $150 and to remove my mid sight mark. I said no and lived with the crimp for a year. Then this Christmas my wife ordered the Murray vent rib tool from Brownells.. Was just going to test the fit of the tool and realized I could fix it. Took me seconds and my barrell was good as new. Every shotgunner with vent ribs needs this tool.