Wysokiej jakości mocowanie do celowników Trijicon RMR dla pistoletów RUGER®
Przedstawiamy mocowanie EGW do celowników Trijicon RMR, które jest kompatybilne z modelami RUGER® MK I, II, III, IV, P85 oraz P90. Dzięki temu akcesorium, montaż celownika red dot staje się szybki i prosty.
Opis produktu:
- Materiał: Aluminium 7075
- Wykończenie: Matowy czarny hardcoat
- Całkowita długość: 1.780"
- Całkowita szerokość: 1.1"
- Elementy montażowe: (2) śruby płaskie 6-32, (1) śruba blokująca 6-32 x 3/16
- Kompatybilność z celownikami: Trijicon RMR, Holosun HS507C
Aby zamontować celownik Trijicon RMR, wystarczy zdjąć tylną muszkę z broni i zastąpić ją naszym mocowaniem. Nie są wymagane żadne modyfikacje. Możesz w każdej chwili zdjąć nasze mocowanie i przywrócić tylną muszkę. Elementy montażowe są dołączone.
Instrukcje instalacji:
- Usuń tylną muszkę*
- Zainstaluj mocowanie EGW w rowku mocującym
- Dokręć śrubę blokującą (jeśli dotyczy)
- Umieść celownik red dot na mocowaniu EGW (umieszczenie małego kawałka papieru między celownikiem a mocowaniem ułatwi demontaż i ochroni celownik przed Loctite)
- Nałóż niebieski Loctite na dostarczone śruby montażowe
- Dokręć śruby montażowe do momentu 15 in/lbs
Uwaga: Do instalacji śrub dołączonych do mocowania potrzebny jest klucz imbusowy 5/64''.
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.