Wysokiej jakości montaż celownika Trijicon RMR do pistoletów Kimber
Oferujemy montaż celownika KIMBER FIXED REAR SIGHT TRIJICON RMR SIGHT MOUNT, który jest idealnym rozwiązaniem dla właścicieli pistoletów Kimber, pragnących zamontować celownik Trijicon RMR. Poniżej znajdują się szczegóły produktu:
Opis produktu:
- Materiał: Aluminium 7075
- Powłoka: Matowa czarna powłoka hardcoat
- Całkowita długość: 1.780"
- Całkowita szerokość: 1.1"
- Sprzęt montażowy: (2) Śruby płaskie 6-32, (1) Śruba 6-32 X 3/16
- Kompatybilność z celownikami: Trijicon RMR, Holosun HS507C
Kompatybilność:
Ten montaż pasuje do:
- Baby Desert Eagle (po 2006 roku)
- EAA Witness Elite Match
Ten montaż nie pasuje do:
Instrukcje instalacji:
- Usuń tylną szczerbinkę z broni.
- Zainstaluj montaż EGW w rowku.
- Dokręć śrubę ustalającą (jeśli dotyczy).
- Umieść celownik red dot na montażu EGW (umieszczenie małego kawałka papieru między celownikiem a montażem ułatwi demontaż i ochroni celownik przed Loctite).
- Nałóż niebieski Loctite na dostarczone śruby montażowe.
- Dokręć śruby montażowe do 15in/lbs.
Uwaga: Do zamontowania śrub dołączonych do tego montażu potrzebny jest klucz imbusowy 5/64''.
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.780" Overall Width: 1.1" Mounting Hardware: (2) 6-32 Flat Head Screws, (1) 6-32 X 3/16 Set Screw Red Dot Fitment: Trijicon RMR, Holosun HS507C This mounts fits: Baby Desert Eagle (Post 2006) EAA Witness Elite Match This mount does not fit: Rock Island 1911s Simply remove the rear sight on your gun and replace it with our mount in order to mount your Trijicon RMR red dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs 2 Flat Head Cap Screws - Provided for Trijicon RMR The screws that are included with this mount require a 5/64'' allen wrench for installation.