Cechy
- Model:
700
- Typ broni:
Remington
- Waga dostawy: 0,136kg
- Wysokość wysyłki: 20mm
- Szerokość wysyłki: 86mm
- Długość wysyłki: 175mm
- UPC: 050806008373
Nr produktu: 080097701
050806008373 Narzędzie sprężynowe zapewnia stały, prostoliniowy nacisk, aby utrzymać bolty na równi z odbiornikiem podczas lapowania za pomocą ściernicy o gradacji 600 do 800, z węglika krzemu. Zapewnia lepsze wyniki niż zwykły nacisk palca. Wymienne gwintowane uchwyty pasują do popularnych akcji wymienionych poniżej.Zaległe, czas dostawy ok. 4-12 tygodnie z magazynu w USA.
Narzędzie BOLT LAPPING TOOLS, 2-PIECE BOLT LAPPING KIT FOR REMINGTON 700 od marki BROWNELLS to idealne rozwiązanie dla każdego strzelca i rzemieślnika broni. Dzięki wymiennej konstrukcji zapewnia stałe ciśnienie sprężynowe, co umożliwia precyzyjne dopasowanie kieszeni blokujących.
Narzędzie sprężynowe zapewnia stałe, proste ciśnienie, aby utrzymać lufy zamka w prostym ułożeniu względem komory podczas lappingu przy użyciu materiału ściernego o gradacji 600 do 800. Daje lepsze rezultaty niż jedynie nacisk palca. Wymienne, gwintowane rękawy pasują do popularnych akcji wymienionych poniżej.
Zestaw zawiera wszystkie narzędzia niezbędne do lappingu wszystkich modeli wymienionych w tabeli. *Cena specjalna, zobacz poniżej.
700
Remington
Very nice fit of parts. 31-08-2015
I bought this one-gun kit after trying to use the plunger body from the M14/M1/M1A kit. It did not fit a sleeve I had bought for the Large Ring Mauser. After receiving this kit with it's plunger body I then began trying all the parts one at a time.
Both plunger bodies are 0.5620" and the sleeves are 0.5625 except the M14, it was 0.563. There were little burrs on the plunger body of the M14 kit that made me think it would not fit the different sleeves. All fit well after a little lapping.
I plan on using the bolt lug lapping tool for several rifles I am building. After using the tool I believe I can use it to square the bolt face on a Mauser Large Ring VZ-24. After reaming the sleeve from existing 9/16" to a 5/8" I will press fit a drill bushing that is 5/8 x 3/8 and use the Mason Reamer Burr which has a 3/8" shaft. The Burr has been ground to 0.3740 to 0.3745. It has a buttery slip fit in the Drill Bushing.
Mauser threads are at a 55 deg pitch and not easy to find. Brownells sells the sleeve with the right threads for the '98 and the face truing Burrs. All you need is the drill bushing, the undersized drill, and the reamer to make the altered sleeve to be able to Lapp the lugs with the original unaltered sleeve, and true the face of your bolt with your altered sleeve. After, of course, you check that the receivers threads are true to the action. This can be checked with a mandrel which Brownells has too. This can be done for any rifle that Brownells has a sleeve for. Happy Gunsmithing, JL.
Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.