Cechy
- Typ broni: AR-15
- Waga dostawy: 0,181kg
- Wysokość wysyłki: 5mm
- Szerokość wysyłki: 66mm
- Długość wysyłki: 229mm
- UPC: 050806107236
Nr produktu: 080000291
050806107236 Nasz poręczny, kompaktowy tool jest wyjątkowo zaprojektowany, aby połączyć kilka narzędzi w jednym. Posiada klucz do nakrętki kasetowej przedłużenia odbiornika, który pasuje do kolb składanych w stylu M4, z wymiennymi wkładkami, które pasują do nakrętek zarówno ze starymi (okrągłymi), jak i nowymi (kwadratowymi) zębami, więc jesteś gotowy na każdy typ nakrętki, który znajduje się na broni przed Tobą. Wkładki dla obu stylów są dołączone i łatwo je zmienić, luzując śrubę sześciokątną w narzędziu. Dla stałych kolb karabinowych znajduje się ostrze śrubokręta do usuwania śrub mocujących kolbę oraz klucz do nakrętki na rurze przedłużenia odbiornika (buffer). Jest nawet otwór kwadratowy ½" na klucz dynamometryczny oraz otwór do zawieszenia narzędzia na tablicy. Łatwo mieści się w torbie na strzelby lub w kieszeni do użycia poza warsztatem.Nasze praktyczne, kompaktowe narzędzie zostało zaprojektowane w sposób unikalny, aby połączyć kilka narzędzi w jednym. Posiada klucz do nakrętki castle nut, który pasuje do kolb składanych w stylu M4, z wymiennymi pinami, które pasują do nakrętek zarówno ze starymi (okrągłymi), jak i nowymi (kwadratowymi) zębami, dzięki czemu jesteś gotowy na każdy typ nakrętki, który napotkasz na swoim sprzęcie.
Łatwo mieści się w torbie na strzelnicę lub w kieszeni, co czyni je idealnym do użytku poza warsztatem.
Materiał: stal, czarny. Długość: 7" (17.8 cm). Zawiera piny do starych i nowych typów pierścieni mocujących kolbę.
Great tool, just one hiccup 22-11-2015
So I gave this 5 stars, despite my hiccup.
This tool is great, it's really well made and feels incredibly sturdy.
My hiccup occurred because I used it on a barrel nut, not a buttstock. If you're using this for your buttstock, no need to read any further...
The Centurion CMR handguard does not come with a tool. Centurion says that you should use a buttstock tool to install the barrel nut since it is the same diameter as the castlenut on a carbine stock. The problem is that you have to use a tool that has one "nub" on it, not three like most others have. These "nubs" aren't meant to torque a barrel nut to 30ft/lbs.
I used my generic amazon AR15 tool to install the barrel nut and caused the "nub" to break off. I bought this thinking it may work for me. This tool has a small replaceable pin (as pictured), which bent and became unusable almost instantly. Luckily, I was able to use a 1/8in punch in the hole perfectly fine.
I'm still 100% happy with this tool, the pin broke because it wasn't designed for the torque but luckily it has a great design where you can replace the pin.
Obviously, the only thing I would change about this is tool is for it to come with a stronger pin. However, if you're building an AR15 you should already have an assortment of punches, which you can use with this tool.
Well made. Inspired confidence. 01-04-2014
I purchased this tool with some concern. I have an older AR-15 that had a 2 position collapsible stock with the 2 round holes instead of the normal castle nut and were well staked in place. I had been told how difficult some staked castle nuts were to remove. A friend who has built several AR-15's suggested just cutting the castle nut with a dremel which would likely destroy the tube as well. I wanted to remove the parts but retain them for collectors purposes and switch them out for a current 6 position stock tube. I just clamped the lower receiver in a vise using Brownells rubber faced vise jaws and was able to remove the ring without damage to the lower or the castle nut. I did tap the wrench with a plastic mallet several times before attempting to loosen the castle nut. This tool worked like a charm and I have already told several other people how well it worked. Brownells guarantee gave me the confidence to try it myself instead of paying someone else to remove the stock nut for me.
Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.