Śliskie wykończenie z Teflonu~ dla ultra-gładkiej pracy
Łatwe przeładowanie dzięki temu wojskowemu uchwytowi przeładowującemu, kompletnemu i gotowemu do montażu w każdym górnym odbiorniku spełniającym standardy mil-spec. Precyzyjnie obrabiany z wytrzymałego, a zarazem lekkiego aluminium 6061 T6, a następnie anodyzowany na twardo dla zwiększenia odporności na zużycie. Końcowa powłoka z Teflonu® zapewnia śliskie, samosmarujące wykończenie dla wyjątkowo płynnej pracy.
SPECYFIKACJE: Aluminium 6061 T6, anodyzowane na twardo, matowe czarne. Długość 67⁄8" (17.5cm). Pasuje do górnych odbiorników AR-15/M16 spełniających standardy mil-spec.
Więcej...
Slick Teflon~ Finish For Ultra-Smooth Operation
Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self-lubricating finish for exceptionally smooth operation.
Oceny klientów dla DOUBLE STAR CHARGING HANDLE ASSEMBLY
Liczba ocen: 12
Od brownells.com: 12
Średnia ocena: 1,8
you get what you pay for(27-08-2010)
i bought this just so i could get my gun together and after charging the weapon about 50 times the metal wore down to the point where the charging handle was binding the good thing about it was the price thats about it
Good price(19-04-2011)
It does the job and for a great price
Nice charging handle(12-05-2011)
Fit is good. Love the Double Star logo. A great value.
Too flexible(18-10-2013)
This functions to charge a weapon, but will not last. It flexes a lot and the latch has a sharp point to it that has already worn a groove in the receiver after just a few uses. I will be returning this one.
low quality control(02-11-2013)
Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...
Not compatible(21-11-2013)
This item is profiled incorrectly to fit the notch in an Aero Precision upper receiver and as such, the latch's finger does not reach the recess in the upper receiver to retain it after charging. It requires much filing and that weakens the latch where there's not much metal to start with.
no problems(25-01-2014)
a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues
not so hot(01-12-2014)
This is made of 6061 aluminum, it sucks and is weak. I wish I had realized that when I ordered it. IT BINDS up the bolt carrier group, and it is already noticeably dented in the front lip (under the hole) AFTER ONLY 10 charges with my rifle.
Get one that is made of 7075 aluminum.
It came as part of a kit, but I'll try to return it.
Buyer Beware!(18-06-2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. I normally would not give a 1 star review, but this CH simply does not even work. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy the Vltor with enhanced latch for a little more money. You likely that you won't have to send this garbage back as I did.
[CAUTION](01-09-2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy one with a bit higher grade metal; preferably steel.
Pure Junk(03-12-2016)
I installed this into my newly built AR 15 and it started jamming right away. This Handle almost jammed, so bad we could almost not even get the bolt back out of the Upper Receiver. I would stay have far away from this handle. Spend a little more and save our money and hands from getting pinched trying to get it to work right.
Binding up from the start(21-02-2017)
Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.
Nr produktu: 100004996 DOUBLE STAR CHARGING HANDLE ASSEMBLY Numer części: AR460841348103851 Łatwe przeładowanie dzięki temu wojskowemu uchwytowi przeładowującemu, kompletnemu i gotowemu do montażu w każdym górnym odbiorniku spełniającym standardy mil-spec. Precyzyjnie obrabiany z wytrzymałego, a zarazem lekkiego aluminium 6061 T6, a następnie anodyzowany na twardo dla zwiększenia odporności na zużycie. Końcowa powłoka z Teflonu® zapewnia śliskie, samosmarujące wykończenie dla wyjątkowo płynnej pracy.
Rodzaj wykończenia:
Matte Black
Stronność:
Right
Wytwórca:
AR-15
Waga dostawy: 0,068kgWysokość wysyłki: 38mmSzerokość wysyłki: 124mmDługość wysyłki: 251mm
Szczegóły pozycji
Made in USA
US export classification: 0A501.x
Elementy te są kontrolowane przez rząd USA i dopuszczone do eksportu tylko do kraju docelowego przeznaczenia do wykorzystania przez ostatecznego odbiorcę lub użytkowników końcowych określonych w niniejszym dokumencie. Nie można ich odsprzedawać, przekazywać ani w inny sposób rozdysponowywać do żadnego innego kraju ani do żadnej innej osoby niż upoważniony odbiorca końcowy lub użytkownik końcowy, w oryginalnej postaci lub po włączeniu do innych przedmiotów, bez uprzedniego uzyskanie zgody od rządu USA lub w inny sposób zatwierdzony przez prawo i przepisy USA.
This item is controlled by the U.S. government and authorized for export only to the country of ultimate destination for use by the ultimate consignee or end-user(s) herein identified. It may not be resold, transferred, or otherwise disposed of, to any other country or to any person other than the authorized ultimate consignee or end-user(s), either in their original form or after being incorporated into other items, without first obtaining approval from the U.S. government or as otherwise authorized by U.S. law and regulations.
Śliskie wykończenie z Teflonu~ dla ultra-gładkiej pracy
Łatwe przeładowanie dzięki temu wojskowemu uchwytowi przeładowującemu, kompletnemu i gotowemu do montażu w każdym górnym odbiorniku spełniającym standardy mil-spec. Precyzyjnie obrabiany z wytrzymałego, a zarazem lekkiego aluminium 6061 T6, a następnie anodyzowany na twardo dla zwiększenia odporności na zużycie. Końcowa powłoka z Teflonu® zapewnia śliskie, samosmarujące wykończenie dla wyjątkowo płynnej pracy.
SPECYFIKACJE: Aluminium 6061 T6, anodyzowane na twardo, matowe czarne. Długość 67⁄8" (17.5cm). Pasuje do górnych odbiorników AR-15/M16 spełniających standardy mil-spec.
Więcej...
Slick Teflon~ Finish For Ultra-Smooth Operation
Cycle loads with ease using this military-style charging handle assembly, complete and ready to drop-in any mil-spec upper receiver. Precision machined from rugged, yet lightweight 6061 T6 aluminum, then hardcoat anodized for a wear-resistant surface that adds strength. A final, Teflon® coating provides a slick, self-lubricating finish for exceptionally smooth operation.
Oceny klientów dla DOUBLE STAR CHARGING HANDLE ASSEMBLY
Liczba ocen: 12
Od brownells.com: 12
Średnia ocena: 1,8
you get what you pay for(27-08-2010)
i bought this just so i could get my gun together and after charging the weapon about 50 times the metal wore down to the point where the charging handle was binding the good thing about it was the price thats about it
Good price(19-04-2011)
It does the job and for a great price
Nice charging handle(12-05-2011)
Fit is good. Love the Double Star logo. A great value.
Too flexible(18-10-2013)
This functions to charge a weapon, but will not last. It flexes a lot and the latch has a sharp point to it that has already worn a groove in the receiver after just a few uses. I will be returning this one.
low quality control(02-11-2013)
Out of 4 , 2 were normal and worked 2 needed modifications (fitment and filing messing up the black paint) to fit and work properly...
Not compatible(21-11-2013)
This item is profiled incorrectly to fit the notch in an Aero Precision upper receiver and as such, the latch's finger does not reach the recess in the upper receiver to retain it after charging. It requires much filing and that weakens the latch where there's not much metal to start with.
no problems(25-01-2014)
a little loose with bolt open in my colt AR but fits snug with charging handle in firing position, makes the weapon operate as it should with no issues
not so hot(01-12-2014)
This is made of 6061 aluminum, it sucks and is weak. I wish I had realized that when I ordered it. IT BINDS up the bolt carrier group, and it is already noticeably dented in the front lip (under the hole) AFTER ONLY 10 charges with my rifle.
Get one that is made of 7075 aluminum.
It came as part of a kit, but I'll try to return it.
Buyer Beware!(18-06-2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. I normally would not give a 1 star review, but this CH simply does not even work. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy the Vltor with enhanced latch for a little more money. You likely that you won't have to send this garbage back as I did.
[CAUTION](01-09-2016)
Not mil-spec material, seems to be aluminum as a steel bolt carrier destroys the charging handle. My experience was when charging the bolt, the flimsy CH was marred by the bolt carrier enough that the front lip slipped up and bound itself the top of the inside of the upper....keeping the bolt carrier from being able to be charged. My suggestion...don't skimp on an item that has to do with the functionality of the rifle. Buy one with a bit higher grade metal; preferably steel.
Pure Junk(03-12-2016)
I installed this into my newly built AR 15 and it started jamming right away. This Handle almost jammed, so bad we could almost not even get the bolt back out of the Upper Receiver. I would stay have far away from this handle. Spend a little more and save our money and hands from getting pinched trying to get it to work right.
Binding up from the start(21-02-2017)
Bought this for a ground up build. Didn't do my homework and regretted it. From the start it was binding up. Swapped it out with a milspec unit and the problem disappeared.