Top takeaways
- Łatwe ładowanie rewolwerów
- Wysoka jakość stali hartowanej
- Wymienne piloty dla różnych kalibrów
Cechy
- Kaliber: 45 Caliber (.451-.454)
- Kąt: 45
- Materiał: Steel
- Waga dostawy: 0,236kg
- UPC: 050806013445
Nr produktu: 080948456
050806013445 Nóż do fazowania 45° łamie krawędzie gwintów, co umożliwia czyste wyjście pocisku lub fazuje komory cylindrów rewolwerów, co przyspiesza ładowanie. Zawiera nóż, rączkę i jeden pilot, wszystko w pudełku z polipropylenu. Wymienny pilot utrzymuje nóż w odpowiednim wyrównaniu. Kup dodatkowe piloty, aby używać jednego noża do wielu różnych kalibrów. Piloty do innych kalibrów dostępne osobno. Nóż 45° dostarczany w zestawach oznaczonych * ma średnicę 5/8", aby prawidłowo fazować większe wyloty lufy i cylindrów w tych kalibrach. Wszystkie inne zestawy mają średnicę ½", nóż 45°.Wybierz jeden z poniższych narzędzi do wykończenia wylotów broni strzeleckiej, narzędzi do obrabiania cylindrów i fazowania.
Should work, but doesn't 06-06-2016
I've ordered 79 degree and 90 degree cutter from Brownell's, and have had great success with them. But for whatever reason, I've had no luck with 45 degree cutter. I literally cannot get it to cut in any way whatsoever, either by hand or drill press. The Allen screw to hold the pilot stripped on the first use as well, making it impossible to secure the pilot to the cutter. I have no idea how but 45 degree cutter is not in the same league as the other two I've bought.
Perfect fit for Ruger rimfire barrels 30-03-2016
Called the Brownells tech and asked what size I should get for my 10/22 Ruger. They couldn't tell me from experience and suggested I slug my barrel. (you want the largest that will fit to eliminate chatter) Brownells offers 3 sizes for the 22 rimfire, .210, .211 and this .215. Not knowing which size, I tried every round object I had on hand and finally came up with a screw shank that mic'd exactly .215-perfect! So that's what I ordered. It only took maybe 3 revolutions total to get the bevel I was looking for. Oiled it up well, a couple light turns (could feel it cutting), pulled it out, cleared the chips with spray degreaser, re-oiled and one last LIGHT pass did it!
Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.