Nowoczesny montaż do celownika Vortex Razor – idealne rozwiązanie dla Twojej broni!
Przedstawiamy montaż SIG SAUER P210A VORTEX RAZOR od marki EGW, stworzony z myślą o miłośnikach strzelectwa, którzy pragną zwiększyć precyzję swoich strzałów.
Opis produktu
- Materiał: Aluminium 7075
- Powłoka: Matowa czarna powłoka twarda
- Całkowita długość: 1.831"
- Całkowita szerokość: 1.062"
- Śruby montażowe: (2) śruby z łbem typu button 8-32, (1) śruba 8-32
- Kompatybilność z celownikami: Vortex Razor, C-More RTS & STS
Aby zamontować celownik Vortex Razor, C-More RTS lub STS, wystarczy zdjąć tylną muszkę z broni i zastąpić ją naszym montażem. Nie są wymagane żadne modyfikacje. Możesz łatwo zdjąć nasz montaż i przywrócić tylną muszkę w każdej chwili. W zestawie znajduje się sprzęt montażowy.
Instrukcja instalacji
- Usuń tylną muszkę*
- Zainstaluj montaż EGW w rowku
- Dokręć śrubę zaciskową (jeśli dotyczy)
- Umieść celownik na montażu EGW (umieszczenie małego kawałka papieru między celownikiem a montażem ułatwi demontaż i ochroni celownik przed Loctite).
- Nałóż niebieski Loctite na dostarczone śruby montażowe
- Dokręć śruby montażowe momentem 15in/lbs
* Upewnij się, że postępujesz zgodnie z instrukcjami, aby zapewnić prawidłowy montaż i działanie systemu.
Material: 7075 Aluminum Coating: Matte Black Hardcoat Overall Length: 1.831" Overall Width: 1.062" Mounting Hardware: (2) 8-32 Button Head Screws, (1) 8-32 Set Screw) Red Dot Fitment: Vortex Razor, C-More RTS & STS Simply remove the rear sight on your gun and replace it with our mount in order to mount your Vortex Razor, C-More RTS or STS red-dot sight. No alterations are required. You can take our mount off and replace your rear sight at any time. Mounting hardware included. Installation Instructions Remove the rear sight* Install the EGW Sight Mount in the dovetail Tighten set screw (if applicable) Place the red dot sight on the EGW Sight Mount (placing a small piece of paper between the red dot sight and the sight mount will make for easier removal and will keep Loctite off of the red dot sight.) Apply blue Loctite to the provided mounting screws Torque mounting screws to 15in/lbs