Ponad 300 000 klientów - dziękujemy!

Ponad 40 000 produktów do polowania i strzelectwa

Zestaw ekstraktorów REMINGTON 700 przywraca funkcjonalność starszych karabinów bez modyfikacji, pasuje do wielu modeli i kalibrów.

BROWNELLS REMINGTON 700-STYLE RIVETED EXTRACTOR KIT SMALL

080000208

Cechy

  • Model: 700
  • Typ broni: Remington
  • Waga dostawy: 0,136kg

Szczegóły pozycji

Made in USA
US export classification: 0A501.x
  • Specyfikacje:
  • Make: Remington
  • Model: 700
0 0 1 PLN

Opis:

Pokaż oryginał (angielski)

Wysokiej jakości zestaw naprawczy do ekstraktorów Remington 700

Oferujemy zestaw REMINGTON 700 RIVETED EXTRACTOR KITS, który przywraca funkcjonalność i serwisowalność Twojej broni. Jest to idealne rozwiązanie dla starszych karabinów, które potrzebują nowego ekstraktora.

Opis produktu

Zestaw zastępuje niedostępny już fabryczny element Remington, co pozwala na dalsze użytkowanie starszych karabinów. To szybka i ekonomiczna alternatywa dla wysyłania broni do fabryki w celu naprawy. Wymiana nie wymaga modyfikacji zamka ani karabinu.

  • Pasuje do wszystkich wariantów modeli 700, 600, 600M, 660, 742, 760, 788, 40X i XP-100.
  • Mały rozmiar pasuje do kalibrów z główką łuski o średnicy .378" (9.60mm), w tym .17 Rem., .222, .223 itp.

Specyfikacje

Materiał: stal. Zawiera ekstraktor, (2) nitów oraz instrukcje. Wymagana instalacja przez rusznikarza.



Cechy

  • Model: 700
  • Typ broni: Remington
  • Waga dostawy: 0,136kg

Szczegóły pozycji

Made in USA
US export classification: 0A501.x

Opinie klientów

Oceny klientów (2)

4,5 / 5
Zdecydowanie polecane

Brownells USA Just the first try, but... 18-09-2013

After checking with Brownell's techs, and getting a negative, I decided to take a chance and try this on a 7 mag. I had already determined that the factory part would not hold its shape from a failed try. The main material of the Brownell's is not quite a thou thicker than the original. The hook seems correctly located. The hook itself is about 0.010" thicker than the 7 mag. But bevels normally have to be cut anyway, so I figured that that could come down with the rest. After bevelling, I discovered that the rivet head must be fully flush, unlike "normal fit". But that was also easy with the stone still in the grinder. IT WORKED! Also, with normal instructions to "bend the ends in", the '06 head took care of that. Both bends at the end of the hook required some straightening. But I should give the standard disclaimer that your results may vary. Brownell does NOT recommend this, nor do I at this stage. I'll have to do a couple more to feel confident. But that will be my first choice next time.

Polecane

Brownells USA that was so easy 26-05-2010

My extractor start slippin off the rounds while cycling the bolt. I had about 2300 rds on it. I know better than to do a Sako mod to a Remmy bolt so I got the original style...very easy to do. Extracts round wit ease...let's see another 2300 minimum. This extactor lips is about 2 millimeters wider than original. Should last a lot longer

Czy wiesz?

Informacje o producencie

Odpowiedzialny podmiot gospodarczy zgodnie z rozporządzeniem UE

Brownells Polska Sp. z o.o.
Armii Krajowej 77
05-071 Sulejówek
Polska
info@brownells.pl

Ups! Coś poszło nie tak.

Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.

Powrót do góry