Ponad 300 000 klientów - dziękujemy!

Ponad 40 000 produktów do polowania i strzelectwa

Szczypce do nakrętek CASTLE NUT PLIERS M14/M1A oferują stalowe uchwyty, które zapewniają sztywność, eliminując uszkodzenia i umożliwiają precyzyjne dokręcanie.

BROWNELLS M14/M1A CASTLE NUT PLIERS

050806005679 080000185

Cechy

  • Model: M1,M14,M1A
  • Typ broni: Springfield
  • Waga dostawy: 0,091kg
  • Wysokość wysyłki: 10mm
  • Szerokość wysyłki: 38mm
  • Długość wysyłki: 147mm
  • UPC: 050806005679

Szczegóły pozycji

Made in USA
  • Specyfikacje:
  • Make: Springfield
  • Model: M14, M1A, M1
154 154 1 PLN
154 PLN 154,00 zł

Ceny zawierają VAT, bez kosztu wysyłki

Nr produktu: 080000185

050806005679 Grube, stalowe uchwyty zapewniają niezbędną siłę i sztywność do dokręcania i luzowania nakrętki tłumika płomienia w karabinkach M1A/M14. Hartowane końcówki szczęk zapewniają precyzyjne dopasowanie, eliminując uszkodzenia rowków. Gumowe osłony dają pewną powierzchnię chwytową.
W magazynie Ponad 10 sztuk w magazynie w USA
1
2
3
4
5
6
7
8
9
10+
154,00 zł

Ceny zawierają VAT, bez kosztu wysyłki

1
2
3
4
5
6
7
8
9
10+
  • Eliminacja zginania
  • Dokładne dopasowanie
  • Wygodny uchwyt

Opis:

Pokaż oryginał (angielski)

Wysokiej jakości narzędzie do pracy z nakrętkami castle dla M14/M1A

CASTLE NUT PLIERS od marki BROWNELLS to niezbędne narzędzie dla każdego właściciela karabinu M1A/M14. Dzięki solidnej konstrukcji i precyzyjnemu wykonaniu, te szczypce zapewniają doskonałą wydajność przy pracy z nakrętką tłumika płomieni.

Opis produktu

Grube, stalowe uchwyty zapewniają niezbędną siłę i sztywność do dokręcania i luzowania nakrętki tłumika płomieni w karabinach M1A/M14. Utwardzone końcówki szczęk zapewniają precyzyjne dopasowanie, eliminując ryzyko uszkodzenia rowków. Gumowe osłony zapewniają pewny chwyt.

Specyfikacja

  • Materiał: utwardzona stal
  • Wykończenie: czarny tlenek
  • Długość: 6" (15 cm)


Cechy

  • Model: M1,M14,M1A
  • Typ broni: Springfield
  • Waga dostawy: 0,091kg
  • Wysokość wysyłki: 10mm
  • Szerokość wysyłki: 38mm
  • Długość wysyłki: 147mm
  • UPC: 050806005679

Szczegóły pozycji

Made in USA

Opinie klientów

Oceny klientów (24)

3,1 / 5
Polecane

Brownells USA Works if you use correctly. 06-05-2018

I used these on a James River armory castle nut that was extremely tight and would not even come loose with the brass punch method and pb blaster. My rifle had the flash hider installed and then the steel face of the flashider that the castle nut tightens forward against was actually peened down against the castle nut then finished over. I assume James river armory does this to accurize the rifle. It was so tight I had to actually clamp my BAD T3 gas cylinder wrench (also purchased here) in a vise while attached to the m-14 gas cylinder and have the rifle resting in a gun cleaning cradle. I firmly grabbed the castle nut with these Brownell pliers and with both hands squeezed them tightly shut and also grabbed the top end of the pliers squeezing them shut here as well (right hand on the handles and left hand on the top squeezing both ends closed at the same time). At the same time, I was holding the pliers closed from both ends I was pushing them rearward tightly into the castle nut grooves so they could not slip or jump out of the grooves and shear the plier teeth or strip the grooves on the castle nut. It was an absolute monster to break loose, but it did so with no damage to pliers or castle nut. Also, again, my rifle was very securely held in place in a gun cradle with a gas cylinder wrench attached and the wrench hung downward from the rifle and secured in a 5" bench vise. There would have been no way to do this without this setup because of the amount of force needed to break this loose. A second person just holding the rifle by hand would have resulted in the rifle just spinning in this persons grasp. I cannot comment on other users who left low ratings without seeing the technique they used with the pliers, but with the amount of force I had to use on this tool I cannot see how it failed for other users unless they need to change up their technique a bit. If I would have just grabbed the pliers by the handles only and tried to twist the nut loose I believe they would have bent or broken. I hope this method helps other users. The reason I took away 1 star is because the handle covers do slip right off and I do believe this tool could be made of thicker steel which would make them live longer. I also used them to re-tighten the castle nut which required just as much torque to line up the Allen screw hole to the castle nut slot and with my same two-handed pushing technique it worked here as well too. As others have said, DO NOT forget to remove the castle nut set screw from the front sight base before removing the castle nut! I would not buy the cheaper version of this brownells sells because the cost savings is negligible.

Zdecydowanie polecane

Brownells USA Worked perfectly 08-04-2018

These pliers worked perfectly to remove and install the castle nut on my m1a. As others have stated don't forget the locking screw and use some penetrating oil when removing the nut.

Czy wiesz?

Informacje o producencie

Odpowiedzialny podmiot gospodarczy zgodnie z rozporządzeniem UE

Brownells Polska Sp. z o.o.
Armii Krajowej 77
05-071 Sulejówek
Polska
info@brownells.pl

Ups! Coś poszło nie tak.

Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.

Powrót do góry