Ponad 300 000 klientów - dziękujemy!

Ponad 40 000 produktów do polowania i strzelectwa

Regulowane osłony poduszki są łatwe w instalacji, pasują do większości rodzajów i rozmiarów kolb, zapewniając idealne dopasowanie bez skomplikowanego cięcia.

BROWNELLS ADJUSTABLE PILLAR BEDDING SLEEVE

080910000

Cechy

  • Waga dostawy: 0,027kg

Szczegóły pozycji

Made in USA
0 0 1 PLN

Niedostępne.

Nr produktu: 080910000

Powiadom o dostępności 154 PLN
0 0 1 PLN
Opis Specification Opinie klientów Accessories

BROWNELLS ADJUSTABLE PILLAR BEDDING SLEEVE

Powiadom o dostępności

Opis:

Pokaż oryginał (angielski)

Uniwersalne rękawy do osadzania - idealne rozwiązanie dla każdego strzelca!

W pełni regulowane rękawy do osadzania są łatwe w montażu i pasują niemal do wszystkich typów i rozmiarów osadzeń karabinowych. Lekka konstrukcja oraz wstępnie konturowane pierścienie regulacyjne przesuwają się na w pełni gwintowanej szynie, co pozwala na precyzyjne dopasowanie bez dodatkowego, czasochłonnego cięcia, szlifowania czy obróbki. Sprzedawane w parach, długi dla śruby tylnej, krótki dla śruby przedniej.

Specyfikacje:

  • Rękaw: stal, .296" (7.5mm) ID, 7/16"-20 tpi.
  • Pierścień regulacyjny: aluminium, .560" (14mm) OD.
  • Przód: .700" (17mm) długości.
  • Tył: 1.16" (2.9cm) długości.

Instalacja wymaga modyfikacji osady oraz syntetycznego osadzenia. Sprzedawane tylko w parach.



Cechy

  • Waga dostawy: 0,027kg

Szczegóły pozycji

Made in USA

Opinie klientów

Oceny klientów (2)

5 / 5
Zdecydowanie polecane

Brownells USA Phenomenal Product! 04-08-2013

I recently used these for the first time on a Win Model 70 Super Grade, CRF, made in the 80's out of the CT plant. I have used Brownell's Acraglass Gel with steel ferrels for pillars for years on other rifles, but decided to try these adjustable pillars for this project. As the previous reviewer stated, getting the holes drilled precisely is critical. I used a 1/2" bit, then a Dremmel tool to enlarge the holes, so that the pillars just slid in an out of the stock. This allowed me to adjust them precisely before gluing in place and making the final adjustments to the sleeve. What is so great about this product is that you can precisely adjust the pillars to get the action of your rifle to lay perfectly in the stock with a perfect free float. Of course then I glass bedded the action, tang, and floor plate area. If you take your time, the product is very easy to use and the results will astound you as to how accurate a factory rifle can be when bedded properly.

Zdecydowanie polecane

Brownells USA Works great. 20-06-2012

I used these to pillar bed a pre 64 Winchester. They are great for someone who is doing a home job. They adjust a little to easy and would move when being placed in the hole. A dab of grease on the thread where the nuts are sitting will help. Make sure you have the correct size Forstner bit. I could not find a single local store that carries this size (9/16). If I could do it again I would get the piloted Forstner bit sold by Brownells (Stock #:080-909-000WB). It is not cheap, but it cost the same as a local machinist charged me to drill the holes in my stock. You could do it with a hand drill at home but these holes must be perfectly straight or you are defeating the purpose.

Czy wiesz?

Informacje o producencie

Odpowiedzialny podmiot gospodarczy zgodnie z rozporządzeniem UE

Brownells Polska
Armii Krajowej
05-071 Sulejówek
Polska
info@brownells.pl

Ups! Coś poszło nie tak.

Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.

Powrót do góry