Cechy
- Nabój:
Universal
- Styl:
Press Type
- Waga dostawy: 0,227kg
- Wysokość wysyłki: 18mm
- Szerokość wysyłki: 86mm
- Długość wysyłki: 112mm
- UPC: 734307901974
Nr produktu: 100010077
Nr prod.: 90197
734307901974 Uniwersalny uchwyt na łuski używany w większości marek pras do reloading. Nie będzie działać z Lee Auto Prime. Zobacz wykres uchwytów na łuski Lee.Zaległe, czas dostawy ok. 4-12 tygodnie z magazynu w USA.
Uchwyt uniwersalny LEE jest niezbędnym akcesorium dla każdego entuzjasty strzelectwa, który korzysta z pras do reloading. Został zaprojektowany tak, aby pasował do większości marek pras, co czyni go wszechstronnym narzędziem w Twoim arsenale.
Uchwyt ten nie jest kompatybilny z systemem Lee Auto Prime. Aby sprawdzić, które łuski są kompatybilne z poszczególnymi uchwytami, zapoznaj się z tabelą uchwytów LEE.
Nie przegap okazji, aby wzbogacić swoje narzędzia o ten wszechstronny uchwyt, który pomoże Ci w precyzyjnym ładowaniu amunicji!
Universal
Press Type
Modified for Sinclair priming tool 13-12-2017
The Sinclair priming tool is in my opinion the best for accurately and consistently seating primers. However, for .338 LM (based on .416 Rigby) there are not a lot of options. The proper Sinclair holder is backordered from Brownell.
However the Sinclair tool accepts Lee hand priming tool shell holders and the #8 Lee shell holder fits and can be installed into the Sinclair tool by facing off the lug that holds the shell holder into a press thus converting it to a Lee priming-type shell holder, in other words just make this holder flat across the bottom as are the Lee priming shell holders. I did this easily in the lathe, a 5 minute job.
You may also need to modify the primer cup in the Sinclair tool to allow a case to fit smoothly. I took .025 off the lip of the cup to match the shell holder floor. The Sinclair plunger is adjustable (see their directions) and it sets primers just below flush when is set to .010 above the lip of the primer cup.
Napotkaliśmy błąd podczas wczytywania tej zawartości. Odśwież stronę, aby kontynuować. Jeśli problem będzie się powtarzał, skontaktuj się z naszym działem obsługi klienta.