Twój koszyk jest pusty.

Koszyk

AERO PRECISION
AR-15/M16 ASSEMBLED UPPER RECEIVER

815421020618 953000017

Zmontowana górna część AR-15 jest dostarczana z już zainstalowanymi drzwiczkami portu i wspomaganiem przeładowania. Wykonana z kutego aluminium 7075-T6, zmontowana górna część jest precyzyjnie obrabiana zgodnie ze specyfikacjami M16/M4 i posiada prowadnice M4. Model w kolorze czarnym posiada laserowo grawerowane oznaczenia T. Model pokryty Cerakote FDE nie posiada oznaczeń T. Cechy: prowadnice M4, otwory na sworzeń demontażu .250, zawiera drzwiczki portu i wspomaganie przeładowania

SPECS: Waga: 8.35oz, kute aluminium 7075-t6.

Więcej...

The AR-15 Assembled Upper Receiver comes with the port door and forward assist already installed. Forged from 7075-T6 aluminum, this assembled upper is precision machined to mil- spec M16/M4 specifications and features M4 feedramps. Black model features laser engraved T marks. Cerakote FDE model does not have T marks. Features: M4 Feedramps .250 takedown pin holes Includes port door and forward assist

SPECS: Weighs: 8.35oz, 7075-t6 forged aluminum.

Więcej...

Oceny klientów dla AERO PRECISION AR-15/M16 ASSEMBLED UPPER RECEIVER

Liczba ocen: 10
Od brownells.com: 10
Średnia ocena: 4,1

excellent (24-06-2016)

These are really nice. Barrel nut torqued fine and the charging handle, bcg operate fine with the additional FDE finish. Matches up to an Anderson lower as good as any. Hardware is of sound quality. Color doesn't match Magpul or sig perfectly, not sure who is to blame. I have 60 rounds through it with no visible wear inside.

<img width="500" src='/userdocs/reviewimages/fbc405ae-1534-4e9d-92bd-7bff9a6fe7be.jpg' alt=''>

Fits like a glove (15-08-2017)

Fit and finish excellent. Can't asked for better. No T markings ? I could care less. Excellent price for a cerakote upper. High quality product at a great price .every aero product I've ever purchased has been excellent. They never have disappointed me.

Excellent fit on CMMG lower (18-08-2015)

I recently installed a 300 AAC barrel on an older CMMG upper and mated it with a brand new CMMG lower. The fit was pretty sloppy between the upper and lower so I decided to invest in this Aero Precision upper hoping for a better fit. As soon as it arrived I checked it for fit with the CMMG lower and found it to be a very snug fit with only a minuscule amount of lateral movement at the pivot point and an almost perfect fit between receivers when locked at the take down point. The finish of this upper matches the lower without any noticeable differences in color shade. Prior to installing the barrel I lapped the Aero upper with Brownell's upper receiver lapping tool and then installed the barrel. Very happy with the fit and looks of this upper.

<img width="500" src='/userdocs/reviewimages/12891b43-a691-4914-bd25-ed194f34cb51.jpg' alt=''>

<img width="500" src='/userdocs/reviewimages/a4de7a35-2cac-4e78-8658-b0550193a1e1.jpg' alt=''>

Great receiver (08-10-2015)

I purchased this for a 6.5 Grendel build and it works great. They were on sale, otherwise I would have went my usual route of either DPMS or YHM uppers.

Barrel slides in freely without having to work it over, but there isn't a whole bunch of play in it. You could see a bit tighter, but it sure wasn't loose. All the parts are assembled correctly and no modifications were needed.

This was mated to a DPMS lower that came off of an AP4, and there was absolutely no issues. Once lubed, the BCG moved freely and did not need to be cycled 100+ times to wear down the finish.

Overall, this is a great receiver for the money. I will purchase these again if they are prcied the same.

Excellent fit and finish (11-03-2016)

Fits perfectly with the Aero lower receiver, which fits perfectly with a DPMS upper. So it should fit any well made lower. The finish is fantastic and the barrel was a snug fit. I also have the Aero optic mount witch I really like as well.

Very Happy (04-09-2016)

Great fit with Anderson lower. FYI it has a large American Flag on the top that is not in the pic but it gets covered by rear backup sight.

Good product but bad assembly (10-12-2016)

Bought one of these to assemble a buddies AR-15. Spent a little extra money on this one because it came per-assembled. when it came today I didn't think twice and I put the barrel and hand-guard on right away. When I functioned checked it I realized that the dust cover spring was not on correctly. This required me to disassemble the entire upper to get the dust cover off and put on correctly, not the end of the world but really annoying when I paid to have it pre installed. hopefully this was just an oops during the assembly.

good quality and price (19-08-2017)

Mates perfectly with an Aero lower and the two become a perfect basis for a .300 blackout build.

Good, Not Excellent (26-08-2017)

This is a solid 3. The only way it would get a 5 is if it fit better. I checked flimsy construction because I couldn't think of anything else to put the fact the it's rather lose.

I bought two to mate with a couple of M&P lowers as the price was only 75 at the time. I share the one reviewer complaint that one of them had the dust cover assembled correctly, and I had to break down the whole upper to fix it. Otherwise, the forward assist was installed correctly, and everything I put on it fit correctly. It's just too darn loose. Lose to the point that I had to put an O-Ring on both of them, as the amount of looseness gave me concern with wearing out my takedown and pivot pen holes. #41 1/16 o rings to be exact. To take 99% of the wobble out of the Midwest industries upper, I use an old ring that is about 1/8 the size of that. There was so much wobble that if I don't put maximum pressure on it, the crosshair wiggles back and forth when shooting from my bipod.

The upper that came with the performance center lower has almost no wiggle without an o ring. The 15t upper also had about 75 percent less wobble than this one. I'd say if it's less than a hundred and you don't plan on using it with a scope or have a problem with o rings and accuwedges then go for it, otherwise my experience suggest spend a little extra and you might get a tighter for from a brand that advertises a tighter fit or from a bullet upper.

Nice, but issue with fitting Aero lower (19-07-2018)

I really like Aero products for the value. This is a no frills assembled upper. Here's the problem... it wouldn't fit a recently purchased standard Aero lower. The receivers mate only with extra force applied as the rear takedown lug is very snug. The rear takedown pin would not close at all. Not even budge from the open position. I used a Strike Industries enhanced LPK. A gen 1 Noveske lower also didn't fit.

Luckily, I had a spare Spike's punisher lower that fit perfectly.

Zobacz 10 dodatkowych opinii na brownells.com

0 0 2 PLN

Nr produktu: 953000017
AERO PRECISION AR-15/M16 ASSEMBLED UPPER RECEIVER
Numer części: APAR501603AC 815421020618 Zmontowana górna część AR-15 jest dostarczana z już zainstalowanymi drzwiczkami portu i wspomaganiem przeładowania. Wykonana z kutego aluminium 7075-T6, zmontowana górna część jest precyzyjnie obrabiana zgodnie ze specyfikacjami M16/M4 i posiada prowadnice M4. Model w kolorze czarnym posiada laserowo grawerowane oznaczenia T. Model pokryty Cerakote FDE nie posiada oznaczeń T. Cechy: prowadnice M4, otwory na sworzeń demontażu .250, zawiera drzwiczki portu i wspomaganie przeładowania

Powiadom o dostępności

Niedostępne.

Specyfikacja: Cartridge: 223 Remington, 5.56 mm NATO, 300 AAC Blackout Color: Black Finish: Matte Make: AR-15 Style: Assembled

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

Ograniczenia

Zaświadczenie uprawniające do zakupu broni (Prześlij oryginał zaświadczenia)

Cechy

Kolor: Black Nabój: 300 AAC Blackout,223 Remington,5.56 mm NATO Rodzaj wykończenia: Matte Styl: Assembled Wytwórca: AR-15 Waga dostawy: 0,318kg Wysokość wysyłki: 74mm Szerokość wysyłki: 91mm Długość wysyłki: 244mm

Szczegóły pozycji

Made in USA
US export classification: I(g)

Nr produktu: 100018687
AERO PRECISION AR-15/M16 ASSEMBLED UPPER RECEIVER, FDE CERAKOTE
Numer części: APAR501801AC 815421020915 Zmontowana górna część AR-15 jest dostarczana z już zainstalowanymi drzwiczkami portu i wspomaganiem przeładowania. Wykonana z kutego aluminium 7075-T6, zmontowana górna część jest precyzyjnie obrabiana zgodnie ze specyfikacjami M16/M4 i posiada prowadnice M4. Model w kolorze czarnym posiada laserowo grawerowane oznaczenia T. Model pokryty Cerakote FDE nie posiada oznaczeń T. Cechy: prowadnice M4, otwory na sworzeń demontażu .250, zawiera drzwiczki portu i wspomaganie przeładowania

Powiadom o dostępności

Niedostępne.

Specyfikacja: Cartridge: 223 Remington, 5.56 mm NATO Color: Flat Dark Earth Finish: Anodized Make: AR-15 Style: Assembled

Dodaj do listy zakupów

Zapytaj

Szczegóły

Dodaj do listy zakupów

Zapytaj

SPECS: Waga: 8.35oz, kute aluminium 7075-t6.

Więcej...

SPECS: Weighs: 8.35oz, 7075-t6 forged aluminum.

Więcej...

Oceny klientów dla AERO PRECISION AR-15/M16 ASSEMBLED UPPER RECEIVER

Liczba ocen: 10
Od brownells.com: 10
Średnia ocena: 4,1

excellent (24-06-2016)

Fits like a glove (15-08-2017)

Excellent fit on CMMG lower (18-08-2015)

Great receiver (08-10-2015)

Excellent fit and finish (11-03-2016)

Very Happy (04-09-2016)

Great fit with Anderson lower. FYI it has a large American Flag on the top that is not in the pic but it gets covered by rear backup sight.

Good product but bad assembly (10-12-2016)

good quality and price (19-08-2017)

Mates perfectly with an Aero lower and the two become a perfect basis for a .300 blackout build.

Good, Not Excellent (26-08-2017)

Nice, but issue with fitting Aero lower (19-07-2018)

Zobacz 10 dodatkowych opinii na brownells.com

Zaloguj się

Nie pamiętasz hasła?
Zarejestruj się

Kontakt

Facebook

Mapa strony

Kategorie produktów

Zamawianie

Obsługa klienta

Witamy!

Witamy w brownells.pl wiodącym dostawcy w Polsce akcesoriów do broni, części broni, narzędzi rusznikarskich, narzędzi do elaboracji amunicji oraz komponentów.

Co oferujemy

Lubisz strzelać, pracujesz przy naprawach broni zawodowo lub hobbystycznie lub po prostu jesteś właścicielem broni, to nasza strona jest właśnie dla Ciebie!

Przez ponad 75 lat strzelcy, rusznikarze, hobbyści, wojskowi, służby specjalne korzystają z usług Brownells jako dostawcy szerokiego asortymentu, wysokiej jakości części broni. Znajdziesz ponad 90 000 produktów w tym części nietypowe, akcesoria, narzędzia rusznikarskie i inne produkty do utrzymania, naprawy i ulepszania swojej broni.

Ceny zawierają VAT, bez kosztu wysyłki

Widok klasyczny

Widok mobilny